98久9在线?|?免费,日本最爽最刺激黄,日本高清不卡免费一区二区三区,全肉高h动漫在线看网址

Table garbage grinder pumps
 CN.HAOSTAR table garbage grinder pumps in and out of the material aspects of the design is very thoughtful, by adjusting the gap between the rotor and the stator can reach a predetermined discharge particles, but also for the selection according to the following classification pulverizing mill. Feed particles must be fragile, particle size according to the device type and imports in proportion to the aggregate particles according to user needs. Table garbage crushing pump is mainly used to cut the pipe transporting the fragile attrition grinding table rubbish.
Applications
    Table garbage grinder pumps wide range of applications, it can relate to grind all kinds of garbage and friable particles smash, crush broken cake and so on.
The main structure
   CN.HAOSTAR Hao Star dining table garbage grinder pumps The main structure is in a working chamber is designed to pump suction mixing, cutting crushing, grinding grinding three devices, the combination of each device are very cleverly arranged in a reasonable bump disk on precision and coordination with each other at high speeds. Every combination of a cutter device has a different point of view, the material gradually extended outward centrifugal force under the action of high-speed transport 迖 to the whole crushing process.
    This series of devices can be based on user needs to set up the system or adjust several grades of the material particles are located 3-0.5mm unequal system specifications, the smallest up to 0.1mm, delivery head up to 10 m, special specifications can be special for you design and manufacturing.
 
Work Features
(1) there is a strong grinding, dispersing, emulsifying, homogenizing, mixing, transport function, continuous operation and does not affect the life of the equipment clearance operation
(2) Quiet design, easy installation, balancing effect is quite good, no vibration, no noise, sealing optional double (single) plane mechanical seal
(3) No fixed grinding material can be used 304,316L, 2205,2Cr13, can nitriding or tungsten carbide infiltration process, the gap can be adjusted to regulate the distance of 0.01 ~ 2mm
Technical Parameters
Model capacity m3 / h Motor Power kw Importers mm
SRH-50 AS 3-7 22 65/50
SRH -65 AS 5-12 30 80/65
SRH -80 AS 9-18 37 100/80
SRH -100 AS 15-30 45 125/100
SRH -125 AS 25-35 55 150/125
SRH -150 AS 30-60 75 175/150
NOTE: The motor power according to the hardness of the material viscosity and particle configuration. Installation of the base is generally no bearing equipment 1200 × 600mm